The TC-1™ Ignition System Kit includes the PC Link software and also a USB cable. PC Link software runs under Microsoft® Windows® XP/Vista/7/8 and Windows® 10. Older Windows® versions and Mac® are not supported. PC Link allows the user to program all the parameters and tables within the TC-1™ system. Minimum PC requirement is a 300 MHz Pentium® with super VGA display (SVGA with 1024 x 768 pixel resolution). The CD-1™ connects to the PC by means of the USB interface supplied with the system. The PC must have a free USB port.
Unit has a very compact size of just 4-1/2”L x 3”W x 1”H.
Best of all, Daytona Sensor™ products are covered by a One-Year Limited Factory-Backed Warranty.
Got Boost? Let Us Help You Tame It and Get More Control and Peak Performance Out Of Your Turbochager!
Click Here For Some Special Tech Notes About Our TC-1™ Turbo Controller
Test Drive TC-1™ Software Before You Buy It! Click To Enlarge/Scroll Images and Click Link To Download Sample Software
The Daytona Sensors™ TC-1 flexible turbo control system adaptable to most turbocharged vehicles and features an open and closed loop control modes. Includes programmable duty cycle or boost curves based on RPM, vehicle speed and or time. Compatible with most boost control solenoid valves comes with a built-in 4-bar MAP sensor. User selectable units (psi, In-Hg, or kPa).
The TC-1™ has a bright transflective LCD display with backlight is readable in direct sunlight.
Built-in data logging capability with 16 Mbit DataFLASH memory. Rates ranging from 2 samples/sec for 5 hours to 100 samples/sec for 6 minutes. Features one general purpose input and two general purpose input/output terminals. Inputs can be programmed for high gear retard, burnout RPM limit, vehicle speed sensor, and throttle position sensor. Outputs can be programmed for RPM window switch, nitrous system activation, and multi-gear shift light functions.
TC-1™ logs boost (MAP), RPM, vehicle speed, throttle position, solenoid duty cycle, battery volts, and two 0-5V analog inputs. Features 0-5V analog inputs are compatible with Daytona Sensors™ single or dual channel WEGO™ units for logging wide-band air/fuel ratio data
Unit is programmable general purpose input/output can be used for an external scramble switch or to control a water/methanol injection system.
Includes heavy duty industrial grade clamping terminal blocks allow easy and reliable hookup without soldering or crimping.
USB interface to PC. Windows software for data logging and advanced setup functions.
* Not Legal for sale or use in California or on pollution controlled vehicles
Test Drive Any Of Our Software Before You Buy! Click Here
Find A U.S. Dealer
Click Link Below
(Opens A Pop-Up Window
To Enter Your Zip Code)
Subscribe To Our Daytona Sensors™ eNewsletter