Click on the software that you
want to download. You must use Internet Explorer as your web browser. Firefox
will not work and other web browsers are not supported. These materials are in the form of compressed files that
utilize the new Windows Installer service for an easy one click install. The
software is compatible with Windows XP/Vista/7. We no longer support older Windows
versions. For Windows
Vista, you must disable the User Account Control (UAC) during
installation as described in the Vista
UAC Tech Note. For
Windows 7, please read the
Windows 7 Tech Note. When
the File Download dialog box appears, click on the Run option. Instruction sheets to accompany our software are listed in the section above.
CD Log
Software Version 1.1
PC LInk
CD Software Version 1.1
PC Link CD Marine Software Version 1.0
PC Link CD Pro Software Version 1.0
Nitrous
Log Software Version 2.0
PC
Link Nitrous Software Version 2.0
Shift
Log Software Version 2.0
PC
Link Shift Software Version 1.0
PC Link
TC Software Version 1.1
TC Log
Software Version 1.0
WEGO
Log Software Version 7.1
WEGO
4D
(Dual Channel) Log Software Version 2.2
|
Looking for software for the
Twin Scan series? This product line has been transferred to our sister
company,
Daytona Twin Tec.
|
To install the USB driver
required for the NC-1/NC-2 Nitrous Controllers, SL-1 Shift Light, or WEGO series, click on the link below. Before installing
the USB driver, make sure that your USB device is not connected to your
PC. The
USB driver is compatible with Windows XP/Vista/7. It will not install on older PCs
running Windows 98 or ME. For Windows
Vista, you must disable the User Account Control (UAC) during
installation as described in the
Vista
UAC Tech Note. When the File Download dialog box
appears, click on "Run this program from its current location."
Ignore any security warnings and click on Yes to continue. After
installation of the driver is complete, connect the USB device. Some devices
such as the WEGO series are not powered up by the USB connection and must be
separately connected to power. The
Windows Found New Hardware Wizard will appear and complete installation of
the USB device. Then refer to the COM Port Configuration section in the
instructions for your device to properly configure its USB interface using
Device Manager.
USB Driver
